LevelUpWith

Explore / CompTIA Network+ (N10-009) Exam Prep / Practice questions

CompTIA Network+ (N10-009) practice questions

10 questions from the bank behind this course's timed mock. Free to read and to answer, no account needed, and each has its answer and an explanation. They belong to CompTIA Network+ (N10-009) Exam Prep.

Answer them one at a time →Read lesson 1 free

  1. Question 1

    A junior network technician is planning a pacing strategy for the N10-009 exam. The technician intends to spend exactly one minute on every question, reasoning that up to 90 questions in 90 minutes makes this safe. Which adjustment BEST fits how the exam is structured?

    1. Answer straightforward multiple-choice questions in less than a minute to bank time for performance-based tasks
    2. Keep the one-minute plan, because extra time is added whenever a performance-based task appears
    3. Keep the one-minute plan, because the exam always contains fewer than 90 questions
    4. Leave the performance-based tasks unanswered, because only multiple-choice questions fit a one-minute pace
    Show the answer

    Answer: A. Answer straightforward multiple-choice questions in less than a minute to bank time for performance-based tasks

    Performance-based tasks take longer than the one-minute average, so the time must be recovered by answering simple multiple-choice questions faster. Relying on fewer than 90 questions is wrong because 90 is a ceiling, not a promise of fewer, and the 90 minutes do not change.

  2. Question 2

    A security analyst is comparing log entries from a router, a firewall and a switch to reconstruct an incident. The entries cannot be placed in order because each device shows a different time. The devices sit behind a firewall that blocks most outbound traffic. Which port should the firewall allow so the devices can correct this problem?

    1. 53
    2. 514
    3. 161
    4. 123
    Show the answer

    Answer: D. 123

    NTP on port 123 synchronizes device clocks, which makes timestamps from different devices comparable. Syslog on port 514 only delivers the log messages to a collector; it does not correct the clocks.

  3. Question 3

    A network administrator is documenting a server VLAN. One server is configured with the address 10.50.75.9 and the subnet mask 255.255.248.0. The administrator wants to reserve the last usable host address in that subnet for the default gateway. Which address should be reserved?

    1. 10.50.79.254
    2. 10.50.79.255
    3. 10.50.75.254
    4. 10.50.87.254
    Show the answer

    Answer: A. 10.50.79.254

    The mask 255.255.248.0 (/21) gives a block size of 8 in the third octet, so the subnet runs from 10.50.72.0 to the broadcast 10.50.79.255, and the last usable host is 10.50.79.254. 10.50.79.255 is the broadcast address itself and cannot be assigned to a device.

  4. Question 4

    A network administrator configures interface vlan 30 on a Layer 3 switch with the address 192.168.30.1 255.255.255.0 and issues no shutdown. The SVI still shows as down, and hosts cannot use it as their gateway. Which conditions are the most likely causes? (Select TWO.)

    More than one answer is right.

    1. The ip default-gateway command has not been entered on the switch
    2. VLAN 30 has not been created in the VLAN database
    3. The dynamic entries in the MAC address table have aged out
    4. No port assigned to VLAN 30 is currently up
    5. The SVI address is in a different subnet from the SVI for VLAN 10
    Show the answer

    Answers: B. VLAN 30 has not been created in the VLAN database; D. No port assigned to VLAN 30 is currently up

    An SVI comes up only when its VLAN exists in the VLAN database and at least one port in that VLAN is up. The ip default-gateway command only affects how a Layer 2 switch's management address is reached from other subnets; it does not bring an SVI up.

  5. Question 5

    A network technician is planning cabling for a new office wing. The furthest desks are 140 m of cable path from the MDF, and the design requires twisted-pair copper to every wall jack. Which action BEST meets the requirement?

    1. Install an IDF closer to the wing and link it to the MDF with backbone cabling
    2. Run a single 140 m horizontal copper cable from the MDF to each wall jack
    3. Install a second MDF in the wing and move the service provider entry there
    4. Use 90 m horizontal runs from the MDF and make up the remaining distance with 50 m patch cords
    Show the answer

    Answer: A. Install an IDF closer to the wing and link it to the MDF with backbone cabling

    Twisted-pair copper is limited to a 100 m channel, so an IDF must be placed within reach of the desks and uplinked to the MDF over backbone cabling. Longer patch cords do not help, because the channel allows only about 10 m of patch cords in total on top of the 90 m permanent run.

  6. Question 6

    A security analyst suspects that a legacy application is sending user credentials across the LAN in clear text. The analyst is authorised to investigate and must prove whether the credentials are readable on the wire. Which monitoring method should the analyst use?

    1. sFlow sampling on the access switch
    2. Syslog messages forwarded to a syslog collector
    3. Flow data exported to a NetFlow collector
    4. Packet capture opened in a protocol analyzer
    Show the answer

    Answer: D. Packet capture opened in a protocol analyzer

    Only packet capture records the frames themselves, including unencrypted payload, so it can show credentials in clear text. Flow data exported to a NetFlow collector records only who talked to whom, on which port and how much, with no payload.

  7. Question 7

    A security analyst reviews a remote employee's laptop while it is connected to the company's client-to-site VPN. The output of `route print` shows the default route (0.0.0.0/0) pointing at the local Wi-Fi adapter, and only the 10.1.0.0/16 prefix pointing at the VPN adapter. Company policy requires that all web browsing by remote users be inspected by the corporate firewall. Which change brings the laptop into compliance?

    1. Replace the VPN client with a clientless VPN portal
    2. Reconfigure the VPN for full tunnel
    3. Reconfigure the VPN for split tunnel
    4. Require administrators to connect through a jump box/host
    Show the answer

    Answer: B. Reconfigure the VPN for full tunnel

    The routing table shows a split tunnel, because only the corporate prefix uses the VPN adapter; a full tunnel points the default route at the VPN so all traffic is inspected by the company. A clientless VPN portal only gives browser access to selected applications and does not force the laptop's other internet traffic through corporate controls.

  8. Question 8

    A network administrator must apply port security to an access port used by a single desk PC. The requirement is that frames from any other MAC address are dropped, the port stays up so the legitimate PC keeps working, and each violation is logged and counted for the security team. Which violation mode on a Cisco switch meets all three conditions?

    1. Shutdown
    2. Protect
    3. Restrict
    4. Sticky
    Show the answer

    Answer: C. Restrict

    Restrict drops the offending frames while keeping the port up and logging and counting each violation. Protect also drops the frames and keeps the port up, but does so silently, so the security team would get no record.

  9. Question 9

    A technician is investigating a complaint from last week about a slow workstation. The switch port shows "up, line protocol is up", a-full, a-1000, with 1,752 CRC errors and 212 runts. The user says performance is normal today, and the switch has been up for 14 months. What should the technician do next?

    1. Hard-code the port to full duplex, because runts prove a duplex mismatch
    2. Clear the counters, then re-run the command after a short interval to see whether the errors are increasing
    3. Enter shutdown and then no shutdown on the interface to reset the port
    4. Replace the patch cable, because CRC errors prove the cable is damaged
    Show the answer

    Answer: B. Clear the counters, then re-run the command after a short interval to see whether the errors are increasing

    Counters are lifetime totals, so only a rising counter proves a current fault; clearing and re-checking shows whether the errors are still occurring. Replacing the cable acts on a theory that has not been tested and may address a fault that no longer exists.

  10. Question 10

    A network technician is investigating slow Wi-Fi at a desk in an open-plan office. A wireless analyser at the desk shows an RSSI of -58 dBm and a noise floor of -70 dBm on the client's 2.4GHz channel. The nearest AP is 6 metres away with clear line of sight. Which conclusion and next step are BEST supported by these readings?

    1. The RSSI is too low for the distance, so raise the AP's transmit power to maximum
    2. The SNR is 12 dB because the signal is weak, so add an AP closer to the desk
    3. The SNR is 128 dB, so the wireless link is healthy and the fault is on the wired side
    4. The SNR is 12 dB with a strong signal, so look for an interference source on that channel
    Show the answer

    Answer: D. The SNR is 12 dB with a strong signal, so look for an interference source on that channel

    SNR is RSSI minus noise floor (-58 minus -70 = 12 dB), and a strong RSSI with poor SNR indicates interference rather than distance. Adding an AP addresses a weak-signal or coverage problem, which -58 dBm at 6 metres with line of sight does not show.

The full timed mock

90 questions in 90 minutes, with a pass mark of 80%. Each paper is drawn from a bank of questions written for the mock alone, and these 10 are left out of it. Full access opens it, with every level of the course.

See the course →See the plans

LevelUpWith is independent of the organisation that sets this exam. These questions were written for this course; they are not taken from the exam.