Explore / CompTIA A+ Core 1 (220-1201) Exam Prep / Practice questions
CompTIA A+ Core 1 (220-1201) practice questions
10 questions from the bank behind this course's timed mock. Free to read and to answer, no account needed, and each has its answer and an explanation. They belong to CompTIA A+ Core 1 (220-1201) Exam Prep.
Answer them one at a time →Read lesson 1 free
Question 1
A candidate preparing for the A+ Core 1 (220-1201) exam tells a study group, "The passing score is 675, so I only need to get 75% of the questions right." The group wants to correct the statement using only what CompTIA publishes. Which response is accurate?
- 675 is the number of points earned from 90 questions, each worth 7.5 points
- 675 is a percentile rank, meaning the candidate must outscore 67.5% of other candidates
- 675 is a scaled score on a scale of 100–900, and CompTIA does not publish a conversion to a percentage
- 675 is a scaled score on a scale of 0–900, which works out to exactly 75% of the questions
Show the answer
Answer: C. 675 is a scaled score on a scale of 100–900, and CompTIA does not publish a conversion to a percentage
The passing score is 675 on a scale of 100–900; it is a scaled score, not a percentage or a count of correct answers, and CompTIA publishes no conversion. The 0–900 option is wrong because the lowest possible score is 100, not 0, and the 75% figure is an unsupported conversion.
Question 2
A user replaces a desk setup with a small USB-C port replicator. The monitor, keyboard and wired network all work through the single cable, but the laptop's battery is nearly empty by the end of each day at the desk. The port replicator has no power supply of its own. Which action should the technician take FIRST?
- Disconnect the external monitor to reduce the power the laptop draws
- Replace the USB-C cable with a shorter one
- Replace the laptop battery because it no longer holds a charge
- Connect the laptop's own charger while it is at the desk
Show the answer
Answer: D. Connect the laptop's own charger while it is at the desk
A port replicator may not supply power, so the laptop's own charger is still needed at the desk. Replacing the battery is wrong because the battery is behaving normally for a laptop that is running without any charging source.
Question 3
A technician supports a warehouse located near an airport in the United States. One access point is set to 5GHz channel 100. Several times a week it moves to a different channel by itself, and clients briefly disconnect. The country setting is correct and no one has changed the configuration. What is the most likely explanation?
- A microwave oven interfered with the 5GHz band and forced the change
- Channel bonding widened the channel to 160MHz and removed channel 100
- Dynamic Frequency Selection (DFS) detected radar and moved the access point off the channel
- Adjacent-channel interference from access points on channels 1 and 3 forced the change
Show the answer
Answer: C. Dynamic Frequency Selection (DFS) detected radar and moved the access point off the channel
US channels 52 to 144 are shared with radar, so an access point on channel 100 must use DFS, which listens for radar and leaves the channel when it detects any. Microwave ovens interfere with 2.4GHz, not 5GHz, and they do not trigger a channel move.
Question 4
A technician is troubleshooting a PC in a small office. The user can print to the local network printer but cannot reach any website. The router's LAN address is 192.168.1.1. The `ipconfig` command on the PC shows IP address 192.168.1.25, subnet mask 255.255.255.0, and default gateway 192.168.2.1. Which change restores internet access without breaking local access?
- Change the subnet mask to 255.0.0.0
- Change the default gateway to 192.168.1.1
- Change the PC's IP address to 192.168.2.25
- Change the PC's IP address to a public address
Show the answer
Answer: B. Change the default gateway to 192.168.1.1
The gateway must be the router's LAN address and on the same network as the host, so 192.168.1.1 is correct for a PC at 192.168.1.25 with a 255.255.255.0 mask. Changing the mask to 255.0.0.0 makes 192.168.2.1 look local, but no router exists at that address, so internet traffic still fails.
Question 5
A user buys a Thunderbolt 3 docking station to drive two external monitors and connects it to a USB-C port on a laptop. The dock's USB ports work, but neither monitor shows a picture. The laptop's USB-C port has no lightning-bolt icon beside it. What is the most likely cause?
- The laptop's USB-C port does not support Thunderbolt
- The dock needs a Mini DisplayPort connection for Thunderbolt 3
- The Thunderbolt 3 cable is limited to 5 Gbps
- The dock has exceeded the six-device daisy-chain limit
Show the answer
Answer: A. The laptop's USB-C port does not support Thunderbolt
USB-C is only a connector shape, and a port without the lightning-bolt icon is not automatically a Thunderbolt port, so it may not carry Thunderbolt video. Mini DisplayPort is the connector for Thunderbolt 1 and 2, not Thunderbolt 3, which uses USB-C.
Question 6
A technician must replace the firmware configuration on a laptop whose internal drive is protected with BitLocker full-disk encryption. The procedure includes clearing the TPM in the setup utility. The user's data must remain accessible afterward. What should the technician do FIRST?
- Move the internal drive to the top of the boot order
- Confirm that the drive's recovery key has been saved
- Set a supervisor (BIOS) password on the setup utility
- Disable Secure Boot so the boot loader is no longer verified
Show the answer
Answer: B. Confirm that the drive's recovery key has been saved
Clearing the TPM erases the keys it stores, including the one protecting the BitLocker key, so the recovery key must be confirmed as saved first. Disabling Secure Boot only stops signature checks on boot software and does nothing to preserve access to the encrypted drive.
Question 7
A small business buys a rack-mounted server and installs Windows Server on it. An administrator then downloads Oracle VirtualBox, installs it as a program on that server, and uses it to run four always-on VMs for the staff. Which statement correctly classifies this setup?
- It is a Type 2 hypervisor, because the hypervisor runs as an application on top of a host operating system
- It is a Type 1 hypervisor, because it runs on dedicated rack-mounted server hardware
- It is a Type 1 hypervisor, because the VMs are always on and serve multiple users
- It is a Type 2 hypervisor, because it runs fewer than five VMs
Show the answer
Answer: A. It is a Type 2 hypervisor, because the hypervisor runs as an application on top of a host operating system
The type is decided by what sits beneath the hypervisor: VirtualBox is installed as an application on a host OS (Windows Server), so it is Type 2. The rack-server answer is wrong because the kind of computer does not determine the hypervisor type.
Question 8
A help desk technician needs to test a driver update on a Linux guest before recommending it to a customer. The technician has only a company-issued Windows laptop, must keep using its existing desktop and applications during the test, and cannot reinstall or wipe the laptop. Which solution BEST meets these requirements?
- Subscribe to a SaaS application and run the test there
- Install a Type 1 hypervisor on the laptop and create a Linux VM
- Deploy the driver update in a container on the Windows laptop
- Install a Type 2 hypervisor on the laptop and create a Linux VM
Show the answer
Answer: D. Install a Type 2 hypervisor on the laptop and create a Linux VM
A Type 2 hypervisor installs as an application on the existing host OS, so the technician keeps the Windows desktop while running a Linux guest. A Type 1 hypervisor installs directly onto the hardware with no host OS, which fails "cannot reinstall or wipe the laptop".
Question 9
A technician installs a dedicated video card in a desktop PC. After the restart, the monitor's power light is on but the screen shows "No signal". The monitor's input source is set to DisplayPort, and the DisplayPort cable is fully seated in the monitor and in the motherboard's video port. What should the technician do NEXT?
- Set the display resolution to the value marked (Recommended)
- Move the cable from the motherboard's port to the video card's port
- Swap the monitor for a known-good display
- Replace the new video card with a known-good card
Show the answer
Answer: B. Move the cable from the motherboard's port to the video card's port
When a PC has a video card, the cable belongs in the card's port, not the motherboard's, and moving it is a free check. Replacing the video card is premature because it skips that cheaper connection check.
Question 10
A technician is called to a laser printer that produces dark, complete text, but the user reports the print rubs off onto their fingers when the page is handled. The toner cartridge was replaced yesterday and print density is set to normal. Which component should the technician suspect?
- Imaging drum
- Fuser
- Transfer stage
- Toner cartridge
Show the answer
Answer: B. Fuser
Dark print that rubs off means the toner was never melted into the paper, which is a fuser fault. The toner cartridge is the nearest distractor, but low toner causes pale output, not dark print that smears.
The full timed mock
90 questions in 90 minutes, with a pass mark of 75%. Each paper is drawn from a bank of questions written for the mock alone, and these 10 are left out of it. Full access opens it, with every level of the course.
LevelUpWith is independent of the organisation that sets this exam. These questions were written for this course; they are not taken from the exam.