Choosing Your Guitar and Learning Its Parts
Before you play a note, you need two things: a guitar that suits you, and the names of its parts. Later lessons will say things like "turn the tuning peg" or "press just behind the fret". This lesson makes sure you know what those words mean.
Step 1: Understand the Three Main Types of Guitar
Most beginner guitars are one of three types:
- Steel-string acoustic. It is hollow with a round sound hole, and you can play it anywhere without extra equipment. It sounds bright and full and suits pop, folk, country and singer-songwriter music. The steel strings feel firmer under your fingertips at first.
- Classical (nylon-string) acoustic. It is also hollow, but it uses softer nylon strings that need less pressure to press down. It has a wider neck and a warm, mellow tone that suits classical, flamenco and Latin styles.
- Electric. The body is usually solid and has no sound hole. Devices called pickups turn the strings' vibrations into an electrical signal. You need an amplifier to hear it properly, so include an amp (or headphones that work as an amp) in your budget. The strings are thinner and usually easier to press than acoustic steel strings.
Safety rule: never put steel strings on a classical guitar. A classical guitar is built for the low tension of nylon strings, and steel strings can damage it.
Step 2: Choose Your First Guitar
Work through this checklist in order:
- Start with your music. List three songs you want to play. Strummed acoustic songs point to a steel-string acoustic. Rock and blues riffs point to an electric. Classical pieces point to nylon strings.
- Set a total budget. For an electric, the budget must also cover an amp and a cable. For any guitar, add a gig bag or case, a few picks and a clip-on tuner.
- Check the size. Adults and older teenagers usually use a full-size (4/4) guitar. Children usually need a 1/2 or 3/4 size. Choose by height, arm length and comfort rather than age alone.
- Check comfort. If you can, hold the guitar before you buy it. You should be able to reach around the neck easily, and the body should not feel huge against you.
- Ask for a setup check. A shop can check the action (the height of the strings above the neck). Strings set very high are hard to press and put many beginners off.
Do this now: write down your three songs and your total budget, including accessories.
Step 3: Learn the Parts, from Top to Bottom
Think of the guitar as a person lying down: it has a head, a long neck and a body. Work from the top end towards you.
- Headstock: the flat "head" at the far end, where the strings are anchored.
- Tuning pegs (tuners or machine heads): the keys on the headstock. Turning one tightens or loosens a string, which raises or lowers its pitch.
- Nut: a small notched strip, often made of plastic or bone, where the headstock meets the neck. Each string sits in its own groove. The nut marks one end of the part of the string that vibrates.
- Neck: the long section you hold with your fretting hand. Its front face is the fretboard (also called the fingerboard).
- Frets: the thin metal strips across the fretboard. Pressing a string down just behind a fret shortens it and changes the note. Frets are counted from the nut: 1st fret, 2nd fret, and so on.
- Body: the large part that rests against you. On an acoustic it is a hollow box. On most electrics it is solid.
- Sound hole (acoustic) or pickups (electric): the sound hole lets sound out of the hollow body. Pickups sit under the strings on an electric and "listen" to them electrically.
- Bridge: the part on the body that anchors the strings and passes their vibrations into the body or the pickups.
- Saddle: a thin strip sitting in the bridge that the strings rest on. It marks the other end of the vibrating string, matching the nut.
The nut and the saddle are the two "goalposts" of every string. The notes you play come from the length of string between them.
Do this now: touch each part on your guitar (or on a photo of one) and say its name aloud, from headstock to saddle.
Step 4: Look After Your Guitar
Guitars are made of wood and metal, so sweat, heat and damp all affect them.
Daily habits:
- Wash and dry your hands before you play.
- After playing, wipe the strings and the neck with a soft, dry cloth. This removes sweat and slows down rust.
- Store the guitar in its case or gig bag, or on a stand away from places where it could be knocked over.
Keep it away from:
- Radiators, heaters, fireplaces and direct sunlight
- Hot or cold cars, where temperature and humidity change quickly
- Damp places such as bathrooms, basements and outside walls
Acoustic guitars are especially sensitive. Taylor Guitars recommends keeping them between 45% and 55% relative humidity. Very dry air can crack the wood, and very damp air can make it swell. A cheap digital hygrometer in the room or case tells you the humidity level.
When to change strings. A common guideline is every 3 months or every 100 hours of playing, whichever comes first. Change them sooner if you notice any of these signs:
- They look dull, discoloured or rusty
- They feel rough or gritty
- They sound dull and lifeless
- A string has broken
Today's Practice (10 minutes)
- Name all nine parts aloud twice (3 minutes).
- Turn one tuning peg a quarter turn and back again, and notice which string it controls. Do not tune yet (2 minutes).
- Choose a safe storage spot away from heat and damp (2 minutes).
- Wipe the strings with a dry cloth (3 minutes).
Key Takeaways
- Steel-string acoustics need no extra equipment, nylon-string classicals are gentler on your fingers, and electrics need an amplifier.
- Choose your guitar by your music, total budget, size and comfort.
- In order from the top: headstock, tuning pegs, nut, neck and fretboard, frets, body, sound hole or pickups, bridge, saddle.
- The nut and the saddle mark the two ends of each string's vibrating length.
- Wipe the strings after playing, keep the guitar away from heat and damp, and change the strings about every 3 months or 100 hours of playing.