Why Materials Matter More Than You Think
Many beginners give up on watercolour because of their materials, not their talent. A wash that streaks or a sheet of paper that buckles into hills is usually down to the supplies. You don't need to spend much. You need to spend on the right things. In this lesson you will learn which few items matter most, build a small starter kit, and paint your first swatch chart.
Rule of thumb: if your budget is tight, put most of it into paper, then paint, then brushes.
Task 1: Choose Your Paper
Paper affects how your washes behave more than anything else in your kit. Check three things on the label.
1. Fibre: cotton or wood pulp
- 100% cotton (also sold as "cotton rag" or "cotton linters"). Cotton fibres are strong and absorb water evenly, so washes spread smoothly and the surface stands up to reworking. Saunders Waterford and Arches are well-known 100% cotton papers.
- Wood pulp (cellulose). It costs less and it's fine for practice, but washes tend to dry faster and less evenly, so streaks are more likely. Bockingford is a good-quality wood-pulp paper made from "woodfree" pulp.
How to tell them apart: read the label. Cotton paper always says "100% cotton" or "cotton". If the label says "cellulose", "wood-free" or says nothing about fibre, treat it as wood pulp.
2. Weight
Weight tells you how thick the paper is. It is given in grams per square metre (gsm) or in pounds (lb).
- 300gsm = 140lb. This is the most popular weight. It takes plenty of water without buckling badly.
- 190gsm (90lb) is thinner and cheaper, but it cockles (ripples) more when wet.
- 425gsm+ (200lb+) is very stiff and expensive. You don't need it yet.
For a quick conversion, roughly double the lb figure to get gsm, or halve the gsm figure to get lb.
3. Surface
- Hot-pressed (HP): smooth. Good for fine detail, but washes can dry with hard edges and blotches.
- Cold-pressed (CP), called "NOT" in the UK: slightly bumpy. It is the all-rounder and the most forgiving for washes.
- Rough: deeply textured. It gives sparkle and broken texture, but it's harder to control at first.
DO: buy a pad or block of 300gsm cold-pressed (NOT) paper. Use 100% cotton if you can afford it. If not, use a good wood-pulp paper for practice and keep a few cotton sheets for finished pieces.
Task 2: Choose Your Paints
Watercolour comes in two grades:
- Student grade (for example Winsor & Newton Cotman). Cheaper. It has less pigment, and some colours are made by blending several pigments.
- Artist or professional grade. More pigment, and many colours contain a single pigment, so mixes stay cleaner and brighter.
Both come in pans (small dry cakes) or tubes (soft paint). Pans are tidy and portable. Tubes make it easier to mix large washes.
DO: choose one of these:
- A student-grade pan set with about 8–12 colours, or
- A few artist-grade tubes (a later lesson will show you how to build a limited palette).
Avoid very cheap, unbranded children's sets. They are often chalky and weak, and that makes painting harder.
Task 3: Choose Brushes and the Basics
You only need two or three brushes. Synthetic brushes are cheap and work well.
- Large round (size 8–12). It holds plenty of water and comes to a point. This is your main brush.
- Small round (size 2–4), for detail.
- Flat (about 1 inch / 25mm), for wetting paper and laying broad areas.
Also get:
- A palette. A white plastic palette with wells, or a white ceramic plate.
- Two water jars. Use one to rinse dirty brushes and one to keep clean water for mixing. With only one jar, your colours turn muddy.
- Masking tape and a board (stiff hardboard, MDF or plywood slightly larger than your paper).
- Kitchen roll or a cotton rag for blotting your brush.
- A soft pencil (HB or 2B).
Starter kit checklist: paper, paints, 2–3 brushes, palette, 2 jars, tape, board, kitchen roll, pencil.
Task 4: Tape Your Paper and Paint a Swatch Chart
A swatch chart shows you what each paint really looks like on paper, because the colour of the pan or tube can mislead you.
- Tape the paper down. Put the paper on the board and run masking tape along all four edges, with about half the tape on the paper. Press the tape down firmly so water can't creep underneath.
- Draw a grid. In light pencil, draw one row for each paint. Divide each row into three boxes.
- Label each row in pencil with the paint's name, written in the margin.
- Wet your paints. Drip a little clean water onto each pan, or squeeze a pea-sized amount of tube paint into the palette.
- Box 1: full strength. Mix the paint with very little water, about as thick as single cream, and fill the first box.
- Box 2: medium. Add water until the mix is like milk, then fill the second box.
- Box 3: pale. Dilute the mix until it is barely tinted water, then fill the third box.
- Rinse between colours in your dirty jar, then take water from your clean jar for the next paint.
- Let it dry fully, then peel the tape off slowly, pulling it away from the painting at a low angle.
Look at the result: most colours dry lighter than they look when wet. Notice which paints stay bright when diluted and which look weak or chalky. Keep the chart next to you whenever you paint.
Key Takeaways
- Paper matters most. Choose 300gsm (140lb) cold-pressed (NOT), in 100% cotton if your budget allows.
- Cotton paper is labelled "100% cotton". Unlabelled or "cellulose" paper is wood pulp: cheaper, but washes are less even.
- Hot-pressed is smooth, cold-pressed is lightly textured, and rough is heavily textured.
- Student paint has less pigment than artist paint. Either is fine, but avoid cheap children's sets.
- Two or three brushes, a palette, two water jars, tape and a board are enough.
- A swatch chart shows how each paint looks at full strength and diluted, once it is dry.