Why Look Inside the Earth?
No one has ever seen Earth's mantle or core. The deepest hole ever drilled straight down, the Kola Superdeep Borehole in Arctic Russia, reached 12,262 metres in 1989. That is only about 0.2% of the 6,371 km distance to Earth's centre. Even so, scientists can describe the inside of the planet layer by layer.
This level covers what those layers are and how scientists worked them out. Later levels on volcanoes, earthquakes and moving plates build on it.
What to do: Sketch a circle now. You will add the layers to it as you read.
Step 1: Learn the Four Main Layers
Earth is built in layers, a bit like a peach. It has a thin skin, a thick flesh and a dense stone in the middle. Work from the outside in:
- Crust: the thin, rocky outer shell we live on. It is the thinnest layer by far.
- Mantle: hot, dense rock about 2,900 km thick. It makes up most of Earth's volume. The mantle is mostly solid, but over millions of years parts of it can slowly flow, like very stiff putty.
- Outer core: a layer of liquid metal, mostly iron and nickel, about 2,200 km thick. It starts at a depth of about 2,900 km.
- Inner core: a solid ball of iron and nickel with a radius of about 1,200 km. Its temperature is estimated at more than 5,000°C. It stays solid because the pressure at the centre is so great.
What to do: Draw these four layers on your circle. Make the crust a very thin line. If you drew it to scale, it would be thinner than the ink.
Step 2: Tell the Two Types of Crust Apart
There are two kinds of crust, and they behave differently.
- Oceanic crust
- Lies under the oceans.
- Thin: about 7–10 km.
- Made mainly of dark, heavy basalt, so it is denser.
- Continental crust
- Forms the continents, including the ground under Britain.
- Thick: about 35 km on average, and much thicker under large mountain ranges.
- Made largely of lighter, granite-like rock, so it is less dense.
Crust that is denser sits lower. That is the main reason oceanic crust lies low and holds the oceans, while continental crust rides higher and forms dry land.
What to do: Label each type on your sketch and add one word next to each: "thin and dense" or "thick and light".
Step 3: Understand How Earthquake Waves Reveal the Interior
Scientists study the inside of the Earth in a way that is a little like a hospital scan. When an earthquake happens, it sends seismic waves through the planet. Instruments called seismometers around the world record when and where each wave arrives. The speed and path of a wave change depending on what it passes through.
Two types of wave matter here:
- P waves (primary): push-pull waves that can travel through solids and liquids.
- S waves (secondary): side-to-side shaking waves that can travel only through solids. A liquid cannot hold a shearing (sideways) motion, so S waves stop when they reach one.
These clues were found one at a time:
- 1906: British seismologist Richard Dixon Oldham found evidence that S waves do not pass through Earth's core. The conclusion was that the core, or part of it, is liquid.
- 1909: Croatian scientist Andrija Mohorovičić noticed that waves suddenly speed up a few tens of kilometres down. This marks the boundary between the crust and the mantle, now called the Moho.
- 1910s: Beno Gutenberg pinned down the core–mantle boundary at a depth of about 2,900 km.
- 1936: Danish seismologist Inge Lehmann spotted faint P waves arriving where none were expected. She showed that inside the liquid outer core there is a solid inner core.
The key pattern is the S-wave shadow zone. Seismometers on the far side of the Earth from a large earthquake record no S waves at all. This is because the liquid outer core blocks them.
What to do: On your sketch, draw a star for an earthquake. Then draw arrows: P waves crossing the core, and S waves stopping at the outer core.
Step 4: Separate the Lithosphere from the Asthenosphere
The crust, mantle and core are layers defined by what they are made of. Geologists also divide the outer Earth by how it behaves, meaning whether it is rigid or can flow:
- Lithosphere: the rigid outer shell. It is made of the crust plus the cold, stiff top part of the mantle, and goes down to roughly 100 km on average.
- Asthenosphere: the layer of the upper mantle below the lithosphere, reaching down to roughly 400 km. It is hot, at least about 1,300°C, and it is soft enough to flow very slowly, even though it is mostly solid rock.
Why this matters: The rigid lithosphere is broken into large pieces. Those pieces can slide slowly over the softer asthenosphere beneath them, a bit like crackers resting on warm toffee. This is the basis for how plates move, which is the subject of the next level.
Common mistake to avoid: The lithosphere is not the same as the crust. It includes the crust and the top of the mantle.
What to do: Shade a thick band at the top of your sketch and label it "lithosphere (crust + top of mantle)". Label the softer band below it "asthenosphere".
Key Takeaways
- Earth has four main layers: crust, mantle, liquid outer core and solid inner core.
- Oceanic crust is thin (about 7–10 km), made of basalt and dense. Continental crust is thick (about 35 km on average) and lighter.
- Seismic waves reveal the interior. S waves cannot pass through liquid, so the S-wave shadow zone shows that the outer core is liquid.
- Key discoveries: the Moho (Mohorovičić, 1909), the liquid core (Oldham, 1906) and the solid inner core (Lehmann, 1936).
- The lithosphere (crust plus uppermost mantle) is rigid. The asthenosphere below it flows slowly, which lets the lithosphere move in pieces.
- The deepest hole ever drilled, at 12,262 m, did not get through the crust. Our knowledge of the deep Earth comes from indirect evidence.