LevelUpWith

Explore / Reading British Buildings: Norman to Now / Lesson 2

Lesson 2: How Buildings Stand Up

Understand the main ways British buildings are built: load-bearing walls, arches, vaults, buttresses, timber frames and roof trusses.

Free to read, no account needed. Part of Reading British Buildings: Norman to Now.

By the end of this level you'll be able to

  • Explain how round and pointed arches, vaults and buttresses carry loads
  • Tell box-frame from cruck-frame timber construction
  • Identify common roof forms and name the main parts of a roof truss

The Invisible Struggle

Every building you walk past is quietly fighting gravity. Stone wants to fall, timber wants to sag, and a roof wants to spread its legs and push the walls apart. In the last level you learned to look at plan, structure, materials and decoration. Now we look closely at structure, the hidden battle that decides what a building can be. Once you can see how a building holds itself up, its shape starts to make sense. You will understand why a Norman church has thick walls, why a cathedral seems to be propped up by stone arms, and why a farmhouse in the countryside has two great curved timbers in its end wall.

Walls That Carry the Weight

The simplest answer to gravity is mass. A load-bearing wall carries the weight of the floors and roof above it straight down to its foundations. Imagine a pile of books: each one presses on the one below, and as long as the pile stays upright, it stands. Most ordinary houses in Britain, whether stone cottages or brick terraces, work like this. The catch comes with holes. Every door and window weakens the wall, and the more weight a wall carries, the thicker it must be and the smaller its openings. That is why early stone churches often feel dim and heavy, with deep, narrow windows set into walls you could almost lie down in.

The Arch: Turning Weight Sideways

To make a wide opening in a stone wall you need an arch. An arch is built from wedge-shaped stones called voussoirs, locked together at the top by a central keystone. Push down on an arch and the wedges squeeze tighter against one another, passing the load around the curve and down into the supports on each side. Think of two people leaning shoulder to shoulder: their weight holds them both up.

There is a price. An arch does not only push down, it also pushes outwards. This sideways force is called thrust, and the walls or piers either side must be strong enough to resist it, or the arch will spread and collapse. The round arch, a perfect semicircle, pushes outwards quite strongly, and its height is fixed by its width: a wide round arch must be tall. The pointed arch, made of two curves meeting at a peak, sends more of its load downwards and less sideways. It can also be made taller or lower for the same span, which gave medieval masons far more freedom. Remember that difference. It shaped centuries of building.

Vaults: Arches Stretched into Ceilings

Extend an arch backwards like a tunnel and you have a barrel vault, a stone ceiling. Cross two barrel vaults at right angles and you get a groin vault, with sharp edges where the curves meet. The next leap was the rib vault, in which a skeleton of stone ribs is built first and lighter panels are filled in between, concentrating the weight onto a few points rather than along a whole wall.

Durham Cathedral shows this leap in progress. Its builders vaulted it in stages between 1093 and about 1133, and the nave vault of around 1128 to 1133 has pointed transverse arches crossing it. They are among the earliest pointed rib vaults anywhere. Nearly four centuries later the idea reached its most graceful form at King's College Chapel in Cambridge. Between 1512 and 1515 the master mason John Wastell built a fan vault there, the largest in the world, in which ribs spread out from each support like the spokes of an opened fan.

Buttresses: Leaning Back Against the Push

Vaults bring back the old problem of thrust. A stone ceiling high above a nave pushes outwards on the tops of the walls. The answer is the buttress, a mass of masonry built against the outside of a wall to brace it, much as you might put your hand against a wobbling bookcase. Where the wall is very tall, or an aisle stands in the way, masons used the flying buttress: a half-arch that leaps through the open air from the upper wall to a heavy pier standing outside. With the thrust carried away like this, the walls between the buttresses no longer have to do much work. They can become great sheets of glass.

Timber: Box Frames and Crucks

Away from the cathedrals, much of Britain was built of oak. A timber-framed building stands on a skeleton of wood, and its walls are only infill. There are two main ways of building that skeleton.

A cruck frame begins with a carefully chosen curved tree. Its trunk is split down the middle to make two matching timbers called blades. Raised as a pair, they lean together and meet at the top, where they carry the ridge of the roof. A tie beam or collar joins them across the middle, making a shape like a tall letter A. Each pair of crucks carries both wall and roof at once. Look at the gable end of an old cottage and you may see those two great curves rising almost from the ground.

A box frame works differently. Vertical posts and horizontal beams are jointed into a rectangular cage, a series of boxes, and the roof sits on top as a separate structure. Each section of frame between the main posts is called a bay. If the walls are straight-sided and the roof begins only at the top of them, you are looking at a box frame.

Roofs and the Truss

When you look up at a roof from outside, two shapes are the most common. A gabled roof has two slopes meeting at a ridge, leaving a triangle of wall at each end. A hipped roof slopes on all four sides, so there is no triangle of wall at the ends.

Underneath, most traditional pitched roofs rest on trusses, triangular frames spaced along the building. The two sloping timbers are the principal rafters. Across their feet runs the tie beam, which stops them spreading apart, the same outward push we met in the arch. Higher up, a horizontal collar may brace them. A single upright from the tie beam to the apex is a king post, while two uprights set to either side are queen posts. Running along the length of the roof, purlins rest on the principal rafters and carry the lighter common rafters, which in turn carry the tiles or slates.

The most spectacular timber roof in Britain combines these ideas. In 1393 Richard II commissioned a new roof for Westminster Hall, and the carpenter Hugh Herland built it in oak as a hammerbeam roof. Short brackets called hammerbeams jut out from the tops of the walls, letting the roof span about 21 metres with no tie beam across the hall. It is the largest medieval timber roof in northern Europe.

Key takeaways

  • Load-bearing walls carry weight straight down; the more they carry, the thicker the walls and the smaller the openings.
  • Arches turn weight into downward and outward thrust; pointed arches push outwards less than round ones and can vary in height for the same span.
  • Vaults are arches made into ceilings, from barrel and groin vaults to rib vaults (Durham) and fan vaults (King's College Chapel).
  • Buttresses, including flying buttresses, resist the outward thrust of vaults, letting walls become thinner and windows larger.
  • Cruck frames use paired curved blades that rise to the ridge; box frames use a cage of straight posts and beams with a separate roof.
  • A truss has principal rafters, a tie beam, perhaps a collar, and king or queen posts, with purlins and common rafters running along the roof.

A 6-question knowledge check follows this lesson in the app, free and without an account.

Keep going: levels 3 and 4 are free

Create a free account to open the next two levels, try the AI tutor, save your progress and pick up where you left off. No card needed.

Next: Level 3, Vernacular Building and Local Materials.

Create a free account →See the whole course

More like this